Makita 18V Cordless Brushless Combi Drill DHP481Z Impact Driver DTD171Z Twin Kit 2x 5Ah Batteries, Charger and Makpac. Makita DHP481Z 18v Brushless Combi Drill.
The Makita DHP481 LXT combi drill is powered by an 18v lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber.Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range. There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control.
Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model.Rushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge. Single sleeve keyless chuck allows for easy bit installation/removal by one hand. Twin LED job light with afterglow. Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity.
Variable speed control by trigger. Best possible ergonomic handle for drill-driver applications. Compact overall length of 205mm. XPT - Extreme Protection Technology. Soft Application Max Torque (Nm): 60.
Hard Application Max Torque (Nm): 115-125. Torque Settings: 21 + Drill. LED Job Light: Yes / Twin / After-glow. Battery Compatibility: 18v Lithium-Ion (LXT). Variable Speed Control Trigger: Yes.
No Load Speed (RPM) High: 0-2100. No Load Speed (RPM) Med: N/A. No Load Speed (RPM) Low: 0-550. Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal. Screw Capacity: Machine Screw (mm): 6.Screw Capacity: Wood Screw (mm): 10 x 90. Drill Capacity: Concrete (mm): 16.
Drill Capacity: Metal (mm): 13. Drill Capacity: Wood (mm): 76. Impact Rate (BPM) High: 0-31500. Impact Rate (BPM) Med: N/A. Impact Rate (BPM) Low: 0-8250.
Kg with 1.5/2Ah Batt: 2.5. Kg with 3/4/5Ah Batt: 2.7. Makita DTD171Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver.
The Makita DTD171 18 volt brushless impact driver is one of the most versatile and flexible impact drivers on the market. Makita DTD171Z Impact Driver 18v with a 1/4 Hex Drive and powerful brushless motor plus electronic 4-stage impact power selection and x4 assist mode variations: wood mode, t-mode for thick metal plate, t-mode for thin metal plate and bolt mode. Other features of this very useful DTD171Z Makita Impact Driver includes quick mode switching function with memory function, electric brake, variable speed trigger control, forward or reverse rotation with a bright LED joblight for safe work in low light areas around the site.
This 18v Makita Impact Driver uses a one touch sliding chuck for easy one handed bit instal and removal plus an ergonomically designed high comfort grip and handy belt clip. Electronic 4-stage impact power selection + 4x Assist Modes. 4x Assist Mode Variations: Wood mode, T-mode for thick metal plate, T-mode for thin metal plate and Bolt Mode.
Quick mode switching function with memory function. Ergonomically designed high comfort grip. One touch sliding chuck for easy bit installation and removal. Coarse thread (length) 22 - 125 mm. Max Fastening Torque 180 Nm.
Blows per Minute (Max) - ipm 0 - 3800 ipm. Vibration: Fastening Bolt 13.5 m/sec². Vibration K factor 1.5 m/sec².Noise sound pressure 97 dB(A). Noise sound power 108 dB(A). Noise K factor 3 dB(A). Body only machine Net weight 1.2 - 1.6 kg. No Load Speed (max/hard/med/soft) 0- 3600 / 3200 / 2100 / 1100 rpm. Impact Selection 4 stage + Tek mode (x2) + Assist mode (x2). Driving Shank 6.35mm (1/4). Hex Blows per Minute (Hi) - ipm 0 - 3600 ipm. Blows per Minute (Med) - ipm 0 - 2600 ipm. Blows per Minute (Lo) - ipm 0 - 1100 ipm. 1x Makpac Type 3 Connector Case. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "dvspowertools" and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Norway, Switzerland, Gibraltar, Iceland, Liechtenstein, Monaco.