Twin LED lights illuminate the work area and a single sleeve 13mm keyless chuck allows for rapid bit change. Drilling capacities are 13mm in masonry and steel, 38mm in wood and a 21 stage torque setting allows for accurate screwdriving in both high and low gear. Being part of the Makita Lithium-Ion family it can accept all 18v Li-Ion batteries from 1.5Ah to 5Ah and incorporates a battery protection circuit to prevent overload and overheating. A rubber moulded handle gives better grip and reduces vibration and a handy belt clip can be fitted both left and right handed.DHR263 Twin 18v LXT SDS+ Rotary Hammer Drill The Makita DHR263 runs 2 x 18v batteries in series and gets the same power as a 36v machine, while managing to keep the flexibility of running all your tools on the 18v Lithium Ion platform. It is compatible with 1.5Ah, 3Ah, 4Ah and 5Ah 18v batteries. Featuring a powerful 36v DC motor this machine has enough power to drill holes up to 26mm in concrete 54mm TCT core and 65mm TCT core, a vibration absorbing handle with rubber grip provides excellent control and the balance is what you have come to expect with Makita tools. This is a true 3 function machine with rotary hammer for masonry drilling, rotary only for drilling steel, timber and diamond cores plus hammer only mode for masonry chiselling and a 40 position bit holder allows for the perfect chisel angle to be achieved. Specification DHP482 Capacity in Steel: 13 mm Capacity in Wood: 38 mm Chuck Capacity: 1.5 - 13 mm Capacity in Masonry: 13 mm Blows per Minute (Hi) - ipm: 0 - 28,500 ipm Blows per Minute (Lo) - ipm: 0 - 9,000 ipm No Load Speed (Hi): 0 - 1,900 rpm No Load Speed (Lo): 0 - 600 rpm Voltage: 18 v Torque Settings: 21 + drill Vibration K factor: 1.5 m/sec² Noise sound pressure: 82 dB(A) Noise sound power: 93 dB(A) Noise K factor: 3 dB(A) Net weight: 1.8 kg Max. Fastening Torque (Soft Joint): 36 Nm Max. Fastening Torque (Hard Joint): 62 Nm Vibration: Impact drilling into concrete: 6.0 m/sec² Vibration: Drilling into metal: 2.5 m/sec² DHR263 Voltage: 36 (18V x2) v Max in concrete: 26 mm Max. In steel: 13 mm Max. DHP482 18v LXT Combi Drill DHR263 Twin 18v LXT SDS+ Rotary Hammer Drill 2 x BL1860B 6Ah Batteries DC18RD Twin Charger MakPac 3 Carry Case + Inlay MakPac 4 Carry Case + Inlay. The Makita DLX2137 18v twin pack is part of the LXT range of tools from Makita and features a DHP482 combi drill and and DHR263 twin 18v battery rotary hammer drill, making an ideal fixing kit for builders, plumbers, carpenters and electricians. DHP482 18v LXT Combi Drill. The Makita DHP482 is a cordless combi drill packed full of features.
DHR263 Twin 18v LXT SDS+ Rotary Hammer Drill. The Makita DHR263 runs 2 x 18v batteries in series and gets the same power as a 36v machine, while managing to keep the flexibility of running all your tools on the 18v Lithium Ion platform. Capacity in Steel: 13 mm. Capacity in Wood: 38 mm.
Chuck Capacity: 1.5 - 13 mm. Capacity in Masonry: 13 mm. Blows per Minute (Hi) - ipm: 0 - 28,500 ipm. Blows per Minute (Lo) - ipm: 0 - 9,000 ipm. No Load Speed (Hi): 0 - 1,900 rpm.No Load Speed (Lo): 0 - 600 rpm. Torque Settings: 21 + drill. Vibration K factor: 1.5 m/sec². Noise sound pressure: 82 dB(A). Noise sound power: 93 dB(A).
Noise K factor: 3 dB(A). Net weight: 1.8 kg. Fastening Torque (Soft Joint): 36 Nm.
Fastening Torque (Hard Joint): 62 Nm. Vibration: Impact drilling into concrete: 6.0 m/sec². Vibration: Drilling into metal: 2.5 m/sec². Voltage: 36 (18V x2) v.
Max in concrete: 26 mm. Impacts per Minute: 0-4800 ipm. No Load Speed: 0-1,200 rpm. Vibration: Hammer Drilling: 14.5 m/sec².
Vibration: Drilling into metal: 3 m/sec². Net weight: 4.7 kg.
Variable speed control by trigger. Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current. Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.LED Job light with pre-glow and afterglow functions. 3 mode operation +Rotation + Hammering +Hammering only +Rotation only. When different capacity batteries are uséd together, (for example 3Ah BL1830 and 4Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty. One touch slide chuck for SDS plus bit. 2 x BL1860B 6Ah Batteries. MakPac 3 Carry Case + Inlay. MakPac 4 Carry Case + Inlay. 1 The item is unused and in its original condition. 2 The item is in its original packaging. 3 All accessories and spares are still present. 4 The instruction manual is still present. Makita E-15316 Universal Clip Holder.
Makita GA9071X1 230mm D-Handle Angle Grinder (240v). Join today for exclusive updates, offers and promotions, useful tips, help and advice, direct from the UK's No.1 dedicated Makita tool shop. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "fastfixbristolltd" and is located in this country: GB. This item can be shipped to United Kingdom.