Makita DLX2137PTJ Twin 18v LXT 2 Piece MakPac Combo Kit

  

Makita DLX2137PTJ Twin 18v LXT 2 Piece MakPac Combo Kit. Makita Twin 18v LXT 2 Piece DHP482, DHR263 Combo Kit with 4 x 5.0Ah Li-ion Battery Packs and 2 x Makpac Connector Cases - DLX2137PTJ.

The DLX2137PTJ Twin 18v 5.0Ah powertool kit from Makita features the DHR263 cordless rotary hammer SDS+ LXT from the Twin 18v (36v)lithium-ion range plus the the DHP482 18v LXT cordless combi drill. The twin 18v tools are powered by two 18V Li-ion batteries in series. Two 18V Li-ion batteries can be directly installed on the machine to power the 36v DC motor. Please note twin 18v machines must have two 18v batteries connected and with charge before they will operate. The DLX2137PMJ is supplied with DC18RD Twin port charger, 4 x BL1850 18v Li-ion Battery Packs in a MakPac TYPE 4 and MakPac TYPE 3 connector cases.

Variable speed control by trigger. Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Voltage - 18 v Capacity in Steel - 13 mm Capacity in Wood - 38 mm Chuck Capacity - 1.5 - 13 mm Capacity in Masonry - 13 mm Blows per Minute (Hi) - ipm - 0 - 28,500 ipm Blows per Minute (Lo) - ipm - 0 - 9,000 ipm Noise sound pressure - 82 dB(A) Noise sound power - 93 dB(A) Noise K factor - 3 dB(A) No Load Speed (Hi) - 0 - 1,900 rpm No Load Speed (Lo) - 0 - 600 rpm Torque Settings - 21 + drill Max. Fastening Torque (Soft Joint) - 36 Nm Max. Fastening Torque (Hard Joint) - 62 Nm Vibration K factor - 1.5 m/sec² Vibration: Impact drilling into concrete - 6.0 m/sec² Vibration: Drilling into metal - 2.5 m/sec² Net weight - 1.8 kg.

Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. LED Job light with pre-glow and afterglow functions. When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty. One touch slide chuck for SDS-plus bit. Voltage - 36 (18V x2) v Max in concrete - 26 mm Max.

In steel - 13 mm Max. In wood - 32 mm Impacts per Minute - 0-4800 ipm No Load Speed - 0-1,200 rpm Vibration K factor - 1.5 m/sec² Vibration: Hammer Drilling - 14.5 m/sec² Vibration: Chiselling - 14 m/sec² Vibration: Drilling into metal - 3 m/sec² Net weight - 4.7 kg. 196934-4 - Twin port charger 821551-8 - MAKPAC CONNECTOR CASE (TYPE 3) 821552-6 - MAKPAC CONNECTOR CASE (TYPE 4) DHP482Z - 18v LXT Combi Drill DHR263ZJ - TWIN 18V ROTARY HAMMER SDS+ LXT BL1850B - BATTERY BL1850 18V Li-ion (4x). Credit / Debit card - please call 01303 852692 - dispatch to cardholder registered address only.

Bank transfer - please call 01303 852692 for more information. AB, BT, FK, GY, HS, IM, IV, KA, KW, PA, PH, ZE, all Islands excluding IOW. Orders are dispatched on one of the following services. (Details are within each listing). All customers should expect to receive their orders within 2-3 days maximum.

The following postcodes may take an additional day. AB, BT, IV, KW, PA, PH, all Islands. FFX reserve the right to change the terms, set out above, at any time.

This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "folkestonefixings" and is located in this country: GB.

This item can be shipped to United Kingdom, European Union.

1. Battery Capacity: 4 Ah
2. Battery Included: Yes
3. Battery Technology: Lithium-Ion (Li-Ion)
4. Chuck Size: 13mm
5. Number of Batteries: 4
6. Power: Cordless Electric
7. Power Source: Battery
8. Product Group: Tool
9. Type: Combi Drill
10. Voltage: 18 V
11. Brand: Makita
12. MPN: DLX2137PTJ
13. Weight: 12kg
14. Height: 50cm
15. Width: 40cm
16. Depth: 30cm
17. Manufacturer Part Number: DLX2137PTJ
18. Item Weight: 12kg
19. Item Height: 50cm
20. Item Width: 40cm
21. Item Depth: 30cm
22. EAN: 0088381827706